师资队伍

韩涛(副教授)

作者:审核:发布者:张秀良发布时间:2018-12-04浏览次数:6569

»姓名:韩涛

»系属:材料科学与加工系

»学位:博士

»职称:副教授

»专业:焊接

»导师类别:硕导

»电子邮箱:hantao@upc.edu.cn

»联系电话:15318792919

»通讯地址:山东省青岛市黄岛区长江西路66

»概况

研究方向

1、油气管线的在役焊接

2、材料加工过程的数值模拟

3、高效高精度焊接技术

教育经历

2001.09-2005.07,中国石油大学(华东),油气储运工程,博士

1996.09-1999.04,石油大学(华东),化工过程机械,硕士

1992.09-1996.07,石油大学(华东),焊接工艺及设备,学士

工作经历

2007.12-至今,中国石油大学(华东),副教授

2002.01-2007.11,中国石油大学(华东),讲师

1999.04-2001.12,石油大学(华东)仪表厂,助工

主讲课程

本科生《焊接冶金与焊接性》、《材料分析技术》、《金属焊接》、《焊接生产与管理》、《焊接结构》,研究生《焊接冶金》、《材料工程中的数值模拟》

指导研究生及博士后

累计指导硕士生25人,协助指导博士生6人。

承担项目

1、国家自然科学基金等项目5

2022~2024,海洋工程******技术研究,国防科技创新特区海洋中心项目(22-05-CXZX-04-04-29),骨干,在研

2021~2026,油气管道环焊缝缺陷检测技术及工程应用,国家重点研发计划-子课题(2021YFA1000103),骨干,在研

2019.01-2022-12,多场耦合作用下长输天然气管线在役焊接烧穿失稳机理及判据研究(项目编号51874345),第二负责人,已结题

2011.01-2013.12,长输天然气管线在役焊接失稳机制及安全评价研究(项目编号51074174),第二负责人,已结题

2012.01-2015.12,海水泵金属陶瓷离子渗硫原位合成纳米固体润滑膜层研究(项目编号51179202),骨干,已结题

2863项目2

2012.12-2016.12,深水钻井隔水管系统工程化研制(项目编号2013AA09A222),骨干,已结题

2008.01-2011.12,深水钻井隔水管系统技术研究(项目编号2008AA09A106-4),骨干,已结题

3、山东省自然科学基金2

2019-072022-06,在役焊接烧穿行为的动态演化规律研究,ZR2019MEE111,主持,已结题

2018.03-2021.06,长输天然气管线多场耦合下的在役焊接失稳判据研究(项目编号ZR2018MEE012),第二负责人,已结题

4、山东省重点研发项目3

2022~2025,长输管线智能化焊接和检测系统关键技术研究及装备开(2022CXGC010202,山东省重大科技创新工程项目,骨干,在研

2017.03-2019.03,海洋工程装备及高技术船舶用激光电弧复合焊接关键技术研究及示范应用(项目编号2017CXGC0812),骨干,已结题

2017.01-2018.12,海洋装备专用焊机焊接质量控制研究(项目编号2016ZDJS05B03),骨干,已结题

获奖情况

喷瓷管道焊接接头的防护研究,中国机械工业科学技术三等奖,排名2/52005

著作

王勇,韩涛,陈玉华.油气管道在役焊接技术,中国石油大学出版社,2016.

论文

  1. Zhang Hongjie, Han Tao* and Wang Yong. Study on the Dynamic Evolution Behavior and Failure Mechanism of Burn-Through Instability during In-Service Welding by Combining In-Situ Observation and Failure Analysis[J]. Materials, 2023, 16, 118.  

  2. Han Tao, Han Laihui, Wu Qian, Xu Shikai, Sun Jianbo, Wang Yong. Analysis of the dynamic evolution behavior of radial deformation and cracks during in-service welding instability based on quasi-in-situ and in-situ experiments[J]. International Journal of Pressure Vessels and Piping. 2023, 206: 105072.

  3. Han Laihui, Han Tao*, Wu Qian, Xu Shikai, Sun Jianbo, Wang Yong. Study on microstructural characterization and local stress–strain behavior of transition zone within K-TIG welded SAF2205/Q235 dissimilar joints[J]. Journal of Materials Research and Technology. 2023, 24: 5119-5138.

  4. 谷世伟,徐良,杨海锋,张洪杰,韩涛*. X70管线钢在役焊接损伤演化模型与数值模拟[J].焊接学报, 2022, 43(10):86-92.

  5. Laihui Han, Tao Han*,1 , Guangxue Chen, Bangyu Wang, Jianbo Sun, Yong Wang.Influence of heat input on microstructure, hardness and pitting corrosion of weld metal in duplex stainless steel welded by keyhole-TIG, Materials Characterization, 2021,175:111052

  6. Zhang Hongjie, Han Tao*, Wang Yong, Wu Qian. Effects of Fillet Weld Size and Sleeve Material Strength on the Residual Stress Distribution and Structural Safety while Implementing the New Sleeve Repair Process[J]. Materials, 2021, 14, 7463.

  7. Wu Qian, Wang Yong, Han Tao*, Wang Hongtao, Han Laihui, Bao Liangliang. Molecular Dynamics Simulations of the Effect of Temperature and Strain rate on the Plastic Deformation of Body Centred Cubic Iron Nanowires[J]. Journal of Engineering Materials and Technology, 2021,143:031007  

  8. Laihui Han, Tao Han*, Bangyu Wang, Guangxue Chen, Jianbo Sun, and Yong Wang. Effects of Keyhole Tungsten Inert Gas Welding Parameters on 2205 Duplex Stainless Steel Welded Joints, Journal of Materials Engineering and Performance, 2021

  9. 鲍亮亮,王勇,张洪杰,徐良,韩涛*.EQ70钢激光电弧复合焊焊接热循环及其 对热影响区组织演变的影响,焊接学报,2021,423):26-33

  10. Zhang Hongjie, Wang Yong, Han Tao*, Bao Liangliang, Wu Qian and Gu Shiwei. Numerical and experimental investigation of the formation mechanism and the distribution of the welding residual stress induced by the hybrid laser arc welding of AH36 steel in a butt joint configuration[J]. Journal of Manufacturing Processes, 2020, 51: 95-108.

  11.  Zhang Hongjie, Han Tao*, Wang Yong, Wang Bangyu and Chen Guangxue. Study on temperature- microstructure- stress fields of thick-walled plate welded by hybrid laser arc welding[J]. Journal of Physics: Conference Series, 2021, 2083(2):022075.(EI)

  12. Wu Qian, Han Tao*, Wang Yong*, Wang Hongtao, Zhang Hongjie, Gu Shiwei. In-situ Observation of High-temperature Failure Behavior of Pipeline Steel and Investigation on Burn-through Mechanism during In-service Welding[J]. Engineering Failure Analysis, 2020, 109: 104236.

  13. Bao Liang Liang, Wang Yong, Han Tao*. Study on microstructure-toughness relationship in heat affected zone of EQ70 steel by laser-arc hybrid welding [J]. Materials Characterization, 2020(771):110788.  

  14. Wu Qian, Wang Yong, Han Tao*, Wang Hongtao, Gu Shiwei, Han Laihui. Study on the Failure Mechanism of Burn-through during In-service Welding on Gas Pipelines[J]. Journal of Pressure Vessel Technology, 2019, 141(2): 024501.  

  15. 韩涛,谷世伟,徐良,张洪杰,欧阳凯.K-TIG焊接接头的应力与变形,焊接学报, 2019, 40(11): 125-132

  16. Wu Qian, Wang Yong, Han Tao*, Ding Ling. Influence of Internal Corrosive Defect on the Burn-through of In-service Welding on Pipelines[J]. Journal of Pressure Vessel Technology, 2018, 140(4): 041401.SCI



»NameHAN Tao

»Department: Department of Materials Science and Processing

»DEGREEPh. D

»Title: Associate Professor

»SPECIAL:Welding

» Mentor category: Master's supervisor

»E-mail:hantao@upc.edu.cn

»PHONE:(8615318792919

»Address : No. 66 , West Changjiang Road , Huangdao District , Qingdao , China , 266580

»OVERVIEW

Research Field

1In-service welding of oil and gas pipelines

2Numerical simulation of material processing process

3Efficient and high-precision welding technology

Education

2001.09-2005.07China University of Petroleum(East China),Oil-Gas Storage and Transportation Engineering,Ph. D

1996.09-1999.04University of Petroleum(East China),Chemical Process Machinery, Master

1992.09-1996.07University of Petroleum(East China), welding technology and equipment, bachelor

Research papers

  1. Zhang Hongjie, Han Tao* and Wang Yong. Study on the Dynamic Evolution Behavior and Failure Mechanism of Burn-Through Instability during In-Service Welding by Combining In-Situ Observation and Failure Analysis[J]. Materials, 2023, 16, 118.  

  2. Han Tao, Han Laihui, Wu Qian, Xu Shikai, Sun Jianbo, Wang Yong. Analysis of the dynamic evolution behavior of radial deformation and cracks during in-service welding instability based on quasi-in-situ and in-situ experiments[J]. International Journal of Pressure Vessels and Piping. 2023, 206: 105072.

  3. Han Laihui, Han Tao*, Wu Qian, Xu Shikai, Sun Jianbo, Wang Yong. Study on microstructural characterization and local stress–strain behavior of transition zone within K-TIG welded SAF2205/Q235 dissimilar joints[J]. Journal of Materials Research and Technology. 2023, 24: 5119-5138.

  4. Laihui Han, Tao Han*,1 , Guangxue Chen, Bangyu Wang, Jianbo Sun, Yong Wang.Influence of heat input on microstructure, hardness and pitting corrosion of weld metal in duplex stainless steel welded by keyhole-TIG, Materials Characterization, 2021,175:111052

  5. Zhang Hongjie, Han Tao*, Wang Yong, Wu Qian. Effects of Fillet Weld Size and Sleeve Material Strength on the Residual Stress Distribution and Structural Safety while Implementing the New Sleeve Repair Process[J]. Materials, 2021, 14, 7463.

  6. Wu Qian, Wang Yong, Han Tao*, Wang Hongtao, Han Laihui, Bao Liangliang. Molecular Dynamics Simulations of the Effect of Temperature and Strain rate on the Plastic Deformation of Body Centred Cubic Iron Nanowires[J]. Journal of Engineering Materials and Technology, 2021,143:031007  

  7. Laihui Han, Tao Han*, Bangyu Wang, Guangxue Chen, Jianbo Sun, and Yong Wang. Effects of Keyhole Tungsten Inert Gas Welding Parameters on 2205 Duplex Stainless Steel Welded Joints, Journal of Materials Engineering and Performance, 2021

  8. Zhang Hongjie, Wang Yong, Han Tao*, Bao Liangliang, Wu Qian and Gu Shiwei. Numerical and experimental investigation of the formation mechanism and the distribution of the welding residual stress induced by the hybrid laser arc welding of AH36 steel in a butt joint configuration[J]. Journal of Manufacturing Processes, 2020, 51: 95-108.

  9.  Zhang Hongjie, Han Tao*, Wang Yong, Wang Bangyu and Chen Guangxue. Study on temperature- microstructure- stress fields of thick-walled plate welded by hybrid laser arc welding[J]. Journal of Physics: Conference Series, 2021, 2083(2):022075.(EI)

  10. Wu Qian, Han Tao*, Wang Yong*, Wang Hongtao, Zhang Hongjie, Gu Shiwei. In-situ Observation of High-temperature Failure Behavior of Pipeline Steel and Investigation on Burn-through Mechanism during In-service Welding[J]. Engineering Failure Analysis, 2020, 109: 104236.

  11. Bao Liang Liang, Wang Yong, Han Tao*. Study on microstructure-toughness relationship in heat affected zone of EQ70 steel by laser-arc hybrid welding [J]. Materials Characterization, 2020(771):110788.  

  12. Wu Qian, Wang Yong, Han Tao*, Wang Hongtao, Gu Shiwei, Han Laihui. Study on the Failure Mechanism of Burn-through during In-service Welding on Gas Pipelines[J]. Journal of Pressure Vessel Technology, 2019, 141(2): 024501.  

  13. Wu Qian, Wang Yong, Han Tao*, Ding Ling. Influence of Internal Corrosive Defect on the Burn-through of In-service Welding on Pipelines[J]. Journal of Pressure Vessel Technology, 2018, 140(4): 041401.